DESCRIPTION DIAMETER m3/h CONNECTION SANDBOB WK S25 Φ650 16 1 ½” 150kgBOB WK S28 Φ720 20 2” 225kgBOB WK S36 Φ920 30 2” 475kgSide manifold valve included.Operating pressure 3 bar/max 3.5 bar DESCRIPTION DIAMETER m3/h...
Max water temperature: 40oCOperating pressure: 0.5-2 barMaximum pressure: 2.5 barPressing test: 3.0 barConnection: 1.5 ''Filter body: injected polyethyleneAccessories: FV / PP / ABS or PVCFiltration speed: 50 m3 / h / m2Sand granulometry: 0.5-0.9mmSand granulometry: 1-2mmFilling material: Sand-Quartz or Sand-Glass or AFM Max water temperature: 40oCOperating...
Private pool sand filter made of polyethylene using the blow-mold method, available with a 1.5ʺ side manifold valve, transparent lid and cross-sections from 450 to 700mm with flow rates from 7 to 19m3/h. It is an economical and reliable choice for pools up to 60m3. Private pool sand filter made of...
Max water temperature: 40oCOperating pressure: 0.5-2 barMaximum pressure: 2.5 barPressing test: 3.0 barConnection: 1.5 ''Filter body: injected polyethyleneAccessories: FV / PP / ABS or PVCFiltration speed: 50 m3 / h / m2Sand granulometry: 0.5-0.9mmSand granulometry: 1-2mmFilling material: Sand-Quartz or Sand-Glass or AFM Max water temperature: 40oCOperating...
Private pool sand filter made of polyethylene using the blow-mold method, available with a 1.5ʺ cross-section ceiling manifold valve, and diameters from 450 to 700mm with flow rates from 7 to 19m3/h. It is an economical and reliable choice for pools up to 60m3. Private pool sand filter made of...
Bobbin Wound filter, with polyester and fiberglass reinforcement.With clear lid. Maximum pressure 2.5 bar.* Polyvan is not included Bobbin Wound filter, with polyester...
Plastic sand filter made of high density polyethylene, non-corrosive, safe and environmentally friendly.Available sizes from Φ450 to Φ700With manual polyvalve.Comes with a diffuser on top to ensure even distribution of water over the sand substrate Plastic sand filter made of high...
Red glossy polyester & fiberglass filter, with pump cap, screws and base from polypropylene. It has a drain valve, vent and 2 1/2” sand outlet.Maximum filtration speed 50 m3/h/m2. Maximum operating pressure 2 1/2 kg/cm2.Multiport valve not included Red glossy polyester & fiberglass...
Filter laminated in polyester and fibreglass. Grey, polypropylene base, screw-free lid, cap for sand and water discharge, pressure gauge Maximum pressure 2.5 bar. Maximum filtration speed 50/h/ m2. Complies with filtration requirements as per standard EN 16713-1. Sand and glass compatible. Multiport valve not included. Filter laminated in polyester and...
With internal coating of polyester and fiberglass Manufactured using the most modern construction techniques ,ensuring high quality, resistance and greater durability6 ways valve, ergonomic desing With internal coating of polyester...