Bobbin Wound filter, with polyester and fiberglass reinforcement.With clear lid. Maximum pressure 2.5 bar.* Polyvan is not included Bobbin Wound filter, with polyester...
For filters with nozzle plates, a side opening (Ø 400 mm or Ø 225 mm) should be made for emptying the filter medium.Maximum pressure: 4 kg/cm2Large filters of more than 2500 mm will be shipped by special delivery For filters with nozzle plates, a...
Bobbin Wound filter, with polyester and fiberglass reinforcement.With clear lid. Maximum pressure 2.5 bar.* Polyvan is not included Bobbin Wound filter, with polyester...
Red glossy polyester & fiberglass filter, with pump cap, screws and base from polypropylene. It has a drain valve, vent and 2 1/2” sand outlet.Maximum filtration speed 50 m3/h/m2. Maximum operating pressure 2 1/2 kg/cm2.Multiport valve not included Red glossy polyester & fiberglass...
Filter laminated in polyester and fibreglass. Grey, polypropylene base, screw-free lid, cap for sand and water discharge, pressure gauge Maximum pressure 2.5 bar. Maximum filtration speed 50/h/ m2. Complies with filtration requirements as per standard EN 16713-1. Sand and glass compatible. Multiport valve not included. Filter laminated in polyester and...
One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2.*Multiport valve not included. One piece blow-moulded filters made...
Ivory colour. Injected thermo-plastic shell with built in base. Supplied with pressure gauge, manual air vent, and multiport valve. Maximum filtration velocity: 50 m3/h/m2.Maximum working pressure: 2,5 kg/cm2.*Multiport valve not included Ivory colour. Injected thermo-plastic...
Filter laminated in polyester and fibreglass. Grey, polypropylene base, screw-free lid, cap for sand and water discharge, pressure gauge Maximum pressure 2.5 bar. Maximum filtration speed 50/h/ m2. Complies with filtration requirements as per standard EN 16713-1. Sand and glass compatible. Multiport valve not included. Filter laminated in polyester and...
One piece blow-moulded filters made in plastic with threaded lif, multiport valve, pressure gauge and manual air vent and water purge. Ivory colour. Maximum working pressure: 2 kg/cm2. One piece blow-moulded filters made...
Bed height 1m. Made of polyester resin and fiberglass. Complete pressure gauge included. Lid Ø mm 400mm. Suitable for filtration speeds 20, 30, 40 and 50 m3 / h / m2 2½ sand discharge outlet Ideal for large domestic pools Bed height 1m. Made of polyester...
Series of high capacity filters with optimal backwash performance. Made by polyester with outer gel finish. Body with only two parts. Maximum temperature 50ºC.Inner parts made of PVC plastic. Ø 400 cap to remove the sand from the bottom of the filter (optional) on the 1050 and 1200 versions. Series of high capacity filters with...
Complies with filtration requirements according to EN 16713-1 *Polyvalves not included. DN200 filter cap with quick opening system for models 650 and 800 and DN400 screw cap for models 1000 and 1200. DN200 manhole with screw cap. With 0.3mm conventional collector - Filtration speed 40m3/h/m2 Complies with filtration requirements...