Reduced price!

Control panel regulator wall mounted pH/Cl Hanna

Model 01.016.055.001

Condition New

A complete system designed for maintaining swimming pool, hot tub, and spa disinfection water quality.

More details

1 546,59€

-25%

2 062,12€

Quantity

Add to wishlist

More info

Is available in two configurations. The basic version is the in-line model which allows for direct installation of probe and chemical injection fittings into existing piping. The other version is a panel mounted version with a bypass flow cell. The bypass flow cell allows for calibration and maintenance of the probe without having to shut down the recirculation pump. Additional features include LED indicators for dosing, status meter and service, real-time graph display, programmable alarms, and password protection.

pH SPECIFICATIONS
pH Range   0.00 to 14.00 pH
pH Resolution   0.01 pH
pH Accuracy   ±0.05 pH
pH Calibration   pH buffer calibration: automatic, two-point (4.01, 7.01, 10.01 pH)
   pH process calibration: one-point, manual input
Temperature Compensation   automatic, -5.0 to 105.0ºC (23.0 to 221.0ºF) for pH
ORP Specifications
ORP Range   ±2000 mV
ORP Resolution   1 mV
ORP Accuracy   ±5 mV
ORP Calibration   ORP (mV) calibration: one-point, manual input
Temperature Specifications
Temperature Range   -5.0 to 105.0ºC (23.0 to 221.0°F)
Temperature Resolution   0.1°C (0.1ºF)
Temperature Accuracy   ±1ºC (±1.8ºF)
Specifications
pH Dosing   proportional with adjustable set point and proportional band
   delay to start at power-on and overdosing protection
ORP Dosing   proportional with adjustable set point and proportional band
   delay to start at power-on and overdosing protection
   pH dosing interlocked
Alarms   high and low with enable/disable option for all parameters
   alarm is triggered when 5 consecutive readings are over/under threshold
Alarm System   intuitive alert system based on LEDs
   alarm filtering options
   alarm relay control based on user setup
Alarm Relay Output (1)   SPDT 5A/230 VAC
   activated by pH/ORP/temperature selectable alarm conditions
Analog Outputs (3)   4 to 20 mA, sourcing, configurable
   output impedance ≤ 500 Ohm
   accuracy < 0.5 % FS
   galvanically isolated up to 50 V relative to earth ground
Auxiliary Inputs (3)   low level in acid/base tank (contact open)
   low level in chlorine tank (contact open)
   hold input (contact open)
Pump Control   automatic and manual modes
   adjustable flow rate from 0.5 to 3.5 L/h
Log Feature   automatic logging of pH, ORP, and temperature measurements, GLP and events including alarms, errors and power failure
   capacity for 60 days with 10 second sampling interval
   all data .csv files are transferred by USB flash drive
Password Protection   setup, calibration and log recall options features are password protected
Storage Interface   USB
GLP   calibration information including date and time for pH and ORP sensors
Digital Probe Input (1)   galvanic isolated digital input HI1036-1802 pH/ORP/temperature/matching pin combined probe with DIN waterproof connector
Power Supply   100 - 240 VAC
Power Consumption   10 VA
Environment   0 to 50 ºC (32-122 ºF); max 95% RH non-condensing
Dimensions   245 x 188 x 55 mm (73 mm with pumps);
   9.6 x 7.4 x 2.2” (2.9” with pumps)
Weight   1700 g (60 oz)
Ordering Information   BL121-10: Swimming Pool & Spa Controller with HI1036-1802 combined pH/ORP/temperature digital electrode, with probe fittings and chemical injectors

   BL121-20: Swimming Pool & Spa Controller with panel mounted flow cell, HI1036-1802 combined pH/ORP/temperature digital electrode, with probe fittings and chemical injectors