Sealing leaks SB-Pool Sealer Astral

Model

Condition New

Chemical product specially formulated to seal leaks or leaks from swimming pools, spas, hot tubs, wells, cisterns, pipes, etc.

More details

Package

Add to wishlist

More info

• SEALER can be applied to any type of pool, spa, hot water, etc., regardless of the material used in its construction: concrete, paint, fiberglass, siding, acrylic, etc.
• Works equally well with the most common materials used in pipe construction (eg PVC, ABS, Vulcathen, Copper, Steel etc.).
• SEALER does not damage the interior of swimming pools, spas, etc.
• It is an anti-corrosive agent.
• No metals.

Packaging: 1L bottle
Appearance: Color: White viscous liquid
Density (at 20 °C): 1.383 - 1.396 gr / cm3
pH (at 20 °C): 11 –11.5
Performance: 1L SEALER per 80m3 of water
In case of using a concentration greater than 5L of product per 80m3, it is recommended to change the water before using the pool, spa, etc.

These doses are for guidance only and may be modified depending on the condition and type of leak. The effectiveness of the product depends on the size of the crack.

MODIFICATION:
• Completely fill the pool, spac.etc.
• For pools with a thread or diatom filter, place the filter system valve in position
"recycling". For groups with other filter types, it is recommended to remove the filter elements or
bypassing the filter before adding.
• ALWAYS shake the bottle before use.
• Adjust the filtration system and slowly add the dose recommended by the skimmers
or, in overflow tanks, directly into the pool near the push nozzles to make it easier
the homogenization of the product.
• The product is very thick and tends to settle quickly to the bottom of the pool. For
to avoid this, it is recommended to remove the area where it is deposited using a
brush.
• Adjust the valves of the filtration system to concentrate the suction from the
sumps (swimming pools with skimmers). Keep the filtration system in place
recirculation- until the cracks are sealed and no water leaks. Estimated at least 24-48
hours.
• Note the water level of the pool, spac. etc. Check every 2 or 3 days for the level
of water does not fall, thus checking its repair.
• As soon as the cracks disappear, place the filtration system in the "filtering" position (after
reinstalling filter elements removed during leak repair).
• Treatment may be repeated if total repair of the fissures has not been achieved.