Reduced price!

Hammam steam generator with press button controller KEY Steamtec

Model

Condition New

The KEY series steam generator is our classic model. After a long period of market test, this steam generator has been widely loved for its long lasting steadily performance and cost-effective.

More details

1 200,32€

-20%

1 500,40€

Quantity

Power

Color

Add to wishlist

More info

The steam generator ranged from 3kw to 24kw, can be choose for both family and commercial use, it have ss304 weld water tank, ss316 UL certified heating elements which are essential to prevent water scale and extend uselife. Full automation,not only increase comfort of steam bath, but can also help achieve greater energy efficiency.

Maintenance
Auto washing = prevent water scale≠auto descaling.
Washing/flushing is to have fresh water flush tank and heating elements several times which can get soft water scale out.Descaling is totally different, it’s talking about put solution into the water tank, soak, then flush, it’s for reducing hard water scale.
Manual descaling: There is a service hole on top of the steam generator, can put solution through service hole, and let it soak for 2-3 hours, then flush.(Model KEY & AIO have service hole)

*Auto flushing/Washing:Will have fresh water flush tank and heating elements several times which can get soft waterscale out.

*Service hole:There’s an after -service hole on the top of the steam generator, also can be used as another steam outlet.

*Over-heat protection: When the room temperature reaches 2°C higher than your setting , then all heating elements stop working, steam generator under heat preservation state; if water tank temperature over 115 °C, steam generator go into protection state, steam generator stop heating. When the temperature lower than 100°C, steam generator start to work again.

*Sectional heating technology:Each generator has 3 groups of heating elements which provide sectional heating,from the first beginning ,all 3 groups operates at maximum power and rapid heating ,when the room temp is almost reached,then group 1 stop,when the required temps is achieved ,then group 2 stop.The group 3 alternates on and off to maintain the room temp.